w2245The W2245 offers a cost effective indicator solution for crane owners. The system shows the operator the hook load, rated capacity, radius and angle all on one screen and also warns of the approach of overload and an anti-two block (a2b) condition.

The W2245 can be used on both lattice and hydraulic cranes and it can accept inputs from load links, load pins, pressure transducers and dynamometers.

The W2245 has an intelligent self-diagnostics system that warns the operator any type of failure. This reliable system is easy both to install and calibrate.

Contact us today to know more about this product!

Benefits and Features:
  • Low cost
  • Quick & easy installation and calibration.
  • Calibration is password protected.
  • The processor electronics are self-contained in the display. This reduces cab-based hardware.
  • It is a full rated capacity indicator with chart programming.
  • Indication of approach, overload, anti-two-block and cut-out conditions.
  • Intelligent self-diagnostics system
  • Continuous display of load, SWL and parts of lines settings. All system settings are stored on system power down.
  • Compatible with most existing sensors for load.
  • Operator settable limit for, angle, length and radius are standard.
  • Audible and visual alarms warn the operator of approach to overload and capacity overload.
  • Motion cut-out output included.
  • Data protection in case of system failure.
  • Display illumination.
  • Conforms to European (CE) Standards
Technical Data
  • Control box dimensions : 99.05mm X 81.28mm X 200.02mm (3.9" X 3.2" X 7.88")
  • Power : 12 or 24 VDC (10,2 to 36 VDC MAX)
  • Temperature : -20 C to 70 C (-10° to 140° F)
  • Audible alarm : 80 Db in cab (with the external alarm option: 112 Db outside)
  • Relay outputs : 2x2 amp included


Bldg.No.3035, Ring Rd.,
Mearag City,Maadi, Cairo, Egypt Behind Cairo Economic Court